首頁

水性鋼構漆

Water-Based Steel Structure Paint

主要用于室內外、混凝土及墻璧紙裝修及保護。

關鍵字：

水性鋼構漆

所屬分類 Category：

水性防腐鋼構漆系列

Waterborne anti-corrosion steel structure paint series

咨詢熱線 Tel：

13805008562

在線咨詢 Online consultation

產品詳情 Description

產品簡介
本產品主要由進口樹脂、環保顏填料等配制而成。以水為稀釋劑，無污染、不燃不爆，是傳統溶劑型鋼結構專用漆的最佳換代產品。適用于輕型、高層、住宅，空間和橋梁鋼結構行業中冷彎成型、熱軋或焊接的結構部件（C型鋼、槽鋼、工字鋼、H型鋼等)的防護、防腐及裝飾。

產品特點
1、加清水稀釋，不燃不爆，無有害氣體

2、耐候、耐水、耐鹽霧性強,保色性好

3、固含量高,涂刷面積大

4、抗腐蝕、附著力強

5、漆膜堅韌，抗沖擊

6、干燥快、易施工

使用說明
施工方法:噴涂、刷涂

稀釋:涂裝前先將漆攪拌均勻根據施工粘度加5%-8%的清水稀釋

基材處理:所有待涂裝表面應清潔、干燥、無油污、無灰砂、無焊渣、無浮銹

施工環境
施工現場干凈無塵，通風良好。施工時所用工具必須保證干凈整潔。禁止陰天、大霧、大風等惡劣天氣施工

涂裝道數
建議兩遍,涂裝第二遍時，第一遍應干透，至少間隔24小時

注意事項
漆膜可自干，也可低溫烘干，自干溫度不低于5℃，濕度不大于70%烘干時，流平時間不少于15分鐘。嚴禁與其他涂料乃有機溶劑混合,原裝密封包裝12個月(室內陰涼、干燥、通風處5-40℃儲存)

Product Introduction
This product is mainly formulated from imported resins, environmentally friendly pigments and fillers, etc. Using water as the diluent, it is pollution-free, non flammable, and non explosive, making it the best replacement product for traditional solvent based steel structure coatings. Suitable for the protection, anti-corrosion, and decoration of cold formed, hot-rolled, or welded structural components (C-shaped steel, channel steel, I-shaped steel, H-shaped steel, etc.) in the light, high-rise, residential, space, and bridge steel structure industries.

Product Features
1. Dilute with water, non flammable, non explosive, and free from harmful gases
2. Strong weather resistance, water resistance, salt spray resistance, and good color retention
3. High solid content and large coating area
4. Corrosion resistance and strong adhesion
5. The paint film is tough and resistant to impact
6. Fast drying and easy construction

Instructions

Construction method: spraying and brushing
Dilution: Before painting, mix the paint evenly and dilute it with 5% -8% water according to the construction viscosity
Substrate treatment: All surfaces to be coated should be clean, dry, free of oil stains, dust, welding slag, and rust
Construction environment
The construction site is clean and dust-free, with good ventilation. The tools used during construction must be kept clean and tidy. Prohibit construction on cloudy, foggy, windy and other adverse weather conditions
Number of coating passes
It is recommended to apply two coats. When applying the second coat, the first coat should be thoroughly dry, with a minimum interval of 24 hours
matters needing attention
The paint film can be self dried or dried at low temperatures, with a self drying temperature of not less than 5 ℃ and a humidity of not more than 70%. When drying, the leveling time should not be less than 15 minutes. It is strictly prohibited to mix with other coatings or organic solvents. The original packaging is sealed for 12 months (stored indoors in a cool, dry, and ventilated place at 5-40 ℃)